==== Créer dépot ==== ls -1 *.depot |while read i; do package=`echo $i|awk -F"." '{print $1}'`; echo "swcopy -s /var/opt/ignite/depots/patch/java7_Sep08_1131/$i -x enforce_dependencies=FALSE $package @ /var/opt/ignite/depots/patch/java7_Sep08_1131/depot"; done swreg -l depot /var/opt/ignite/depots/patch/java7_Sep08_1131/depot ==== /etc/inetd.conf ==== [root@opign001 - /opt/ignite/bin ] # egrep "tftp|bootp" /etc/inetd.conf # Before uncommenting the "tftp" entry below, please make sure # that you have a "tftp" user in /etc/passwd. If you don't # have one, please consult the tftpd(1M) manual entry for tftp dgram udp wait root /usr/lbin/tftpd tftpd /opt/ignite /var/opt/ignite #bootps dgram udp wait root /usr/lbin/bootpd bootpd bootps dgram udp wait root /opt/ignite/lbin/instl_bootd instl_bootd instl_boots dgram udp wait root /opt/ignite/lbin/instl_bootd instl_bootd ==== Clients PA-RISC ==== [root@opign001 - /var/opt/ignite/recovery/archives ] # tail /etc/opt/ignite/instl_boottab # 15.1.54.125 # IP address usable by any client # 15.1.54.126:080009123456:19960116132331 # Entry usable by all (used already) # 15.1.54.127:::reserve # Reserve this entry once used. # 15.1.54.138:080009123457::reserve # Reserve an IP-Addr for specific host # IGNITE_UX_COPYRIGHT 1993 2002 # # "(C) Copyright 1993-2002 Hewlett-Packard Development Company, L.P." # # IGNITE_UX_COPYRIGHT # 192.9.254.186:0x001321D6D05D:20160202104228:reserve 192.9.252.211:0x00306E087EBE:20160202093811:reserve ==== Clients Itanium ==== [root@opign001 - /var/opt/ignite/recovery/archives ] # tail /etc/bootptab #rnsd414-svg:tc=System-IPF-SVG:ip=192.9.253.245:ha=002264E4F480 tpcun038-svg:tc=System-IPF-SVG:ip=192.9.252.160:ha=00306E465F0F # Physical server tpcun029-svg:tc=System-IPF-SVG2:ip=192.9.250.101:ha=00127943EDC8 # Clarify servers opclf001-svg:tc=System-IPF-SVG:ip=192.9.250.103:ha=0025B3B4ACED opclf002-svg:tc=System-IPF-SVG:ip=192.9.250.104:ha=0025B3B4AE59 ==== Ajouter un client au serveur Ignite ==== * A partir du client /opt/ignite/bin/add_new_client -s ignite-server ==== Restauration d'un client ==== === Démarrer la bécane et booter sur le lan === Une fois sur le GSP, breaker, et lancer **bo lan install** : [tpcun071] MP:CM> PC -on PC -on System will be powered on. Confirm? (Y/[N]): Y -> System is being powered on. -> Command successful. [tpcun071] MP:CM> MP MAIN MENU: CO: Console VFP: Virtual Front Panel CM: Command Menu CL: Console Log SL: Show Event Logs HE: Main Help Menu X: Exit Connection [tpcun071] MP> CO (Use Ctrl-B to return to MP main menu.) Main Menu: Enter command or menu > - - - - - - - - - - - - Live Console - - - - - - - - - - - - Firmware Version 45.44 Duplex Console IO Dependent Code (IODC) revision 1 ------------------------------------------------------------------------------ (c) Copyright 1995-2004, Hewlett-Packard Company, All rights reserved ------------------------------------------------------------------------------ Processor Speed State CoProcessor State Cache Size Number State Inst Data --------- -------- --------------------- ----------------- ------------ 0 1000 MHz Active Functional 67108864 67108864 1 1000 MHz Idle Functional 67108864 67108864 Central Bus Speed (in MHz) : 200 Available Memory : 4194304 KB Good Memory Required : Not initialized. Defaults to 32 MB. Primary boot path: 0/1/1/0.0 Alternate boot path: 0/1/1/0.1 Console path: 0/7/1/1.0 Keyboard path: 0/0/4/0.0 Processor is booting from the first available device. To discontinue, press any key within 10 seconds. Boot terminated. ---- Main Menu --------------------------------------------------------------- Command Description ------- ----------- BOot [PRI|ALT|] Boot from specified path PAth [PRI|ALT] [] Display or modify a path SEArch [DIsplay|IPL] [] Search for boot devices COnfiguration menu Displays or sets boot values INformation menu Displays hardware information SERvice menu Displays service commands DIsplay Redisplay the current menu HElp [|] Display help for menu or command RESET Restart the system ---- Main Menu: Enter command or menu > bo lan install === Lancement de l'environnement de recovery === Main Menu: Enter command or menu > bo lan install Interact with IPL (Y, N, or Cancel)?> n Booting... Boot IO Dependent Code (IODC) revision 4 HARD Booted. ISL Revision A.00.44 Mar 12, 2003 ISL booting hpux KernelPrompt "Choose an operating system to install that your hardware supports:" 120 1 1. target OS is B.11.11 2. target OS is B.11.23 PA 3. target OS is B.11.31 PA 4. Exit Choose an operating system to install that your hardware supports:1 Boot : lan(0/1/2/0;0)/boot/Rel_B.11.11/WINSTALL 12296192 + 2257008 + 2718888 start 0x20c568 alloc_pdc_pages: Relocating PDC from 0xfffffff0f0c00000 to 0x3e900000. gate64: sysvec_vaddr = 0xc0002000 for 2 pages NOTICE: nfs3_link(): File system was registered at index 4. NOTICE: autofs_link(): File system was registered at index 6. NOTICE: cachefs_link(): File system was registered at index 7. igelan0: INITIALIZING HP PCI 1000Base-T Core at hardware path 0/1/2/0 iether1: INITIALIZING HP AB545-60001 PCI/PCI-X 1000Base-T 4-port 1000B-T Adapter at hardware path 0/4/1/0/4/0 iether2: INITIALIZING HP AB545-60001 PCI/PCI-X 1000Base-T 4-port 1000B-T Adapter at hardware path 0/4/1/0/4/1 iether3: INITIALIZING HP AB545-60001 PCI/PCI-X 1000Base-T 4-port 1000B-T Adapter at hardware path 0/4/1/0/6/0 iether4: INITIALIZING HP AB545-60001 PCI/PCI-X 1000Base-T 4-port 1000B-T Adapter at hardware path 0/4/1/0/6/1 System Console is on the Built-In Serial Interface Swap device table: (start & size given in 512-byte blocks) entry 0 - auto-configured on root device; ignored - no room WARNING: no swap device configured, so dump cannot be defaulted to primary swap. WARNING: No dump devices are configured. Dump is disabled. Starting the STREAMS daemons-phase 1 Create STCP device files Starting the STREAMS daemons-phase 2 $Revision: vmunix: vw: -proj selectors: CUPI80_BL2000_1108 -c 'Vw for CUPI80_BL2000_1108 build' -- cupi80_bl2000_1108 'CUPI80_BL2000_1108' Wed Nov 8 19:24:56 PST 2000 $ Memory Information: physical page size = 4096 bytes, logical page size = 4096 bytes Physical: 4192256 Kbytes, lockable: 3193720 Kbytes, available: 3685656 Kbytes * Preparing to execute init... ======= 02/02/16 05:20:34 EST HP-UX Installation Initialization. @(#)Ignite-UX Revision C.7.14.274 @(#)ignite/launch (opt) Revision: /branches/IUX_RA1203/ignite/src@84460 Last Modified: 2012-02-24 09:31:30 +0530 (Fri, 24 Feb 2012) * Configuring RAM filesystems... * Scanning system for IO devices... WARNING: ioctl: DLKM is not initialized * Boot device is: 0/1/2/0 * Setting keyboard language. === Lancement de l'installation === Welcome to Ignite-UX!Use the key to navigate between fields, and the arrow keys within fields. Use the key to select an item. Use the or to pop-up a choices list. If the menus are not clear, select the "Help" item for more information.Hardware Summary:System Model: 9000/800/rp3440 +----------------------+---------------+--------------------+[ Scan Again ] | Disks: 2 ( 136.7GB)| Floppies: 0 | LAN cards: 5 | | CD/DVDs:0 | Tapes: 0 | Memory: 4094Mb | | Graphics Ports: 0 | IO Buses: 7 | CPUs:2 |[ H/W Details ] +----------------------+---------------+--------------------+ [ Install HP-UX ] [ Run an Expert Recovery Shell ] [ Advanced Options] [ Reboot ] [ Help ] User Interface Options: [ ] Advanced Installation (recommended for disk and filesystem management) [ ] No user interface - setup basic networking, use defaults and go [ * ] Remote graphical interface running on the Ignite-UX server * Bringing up Network (lan0) add net default: gateway 192.9.255.254 * Reading configuration information from server... * NFS mounting clients directory. * Using client directory: /var/opt/ignite/clients/0x001321D6D05D Ignite-UXWaiting for installation instructions from server: 192.9.254.116Icon Name Shown in GUI: tpcun071 Active System Name/IP: tpcun071-svg/192.9.254.186You may now complete the installation using the "ignite" graphical interface on the Ignite-UX server (See ignite(1M)). If you are not already running "/opt/ignite/bin/ignite" on the server, do so now. No further action is required at this console. === Suivi de la restore via le serveur ignite === Lancer la commande **ignite**. {{:informatique:nix:hp:restore_ignite_1.png?400|}}{{:informatique:nix:hp:restore_ignite_2.png?400|}} {{:informatique:nix:hp:restore_ignite_3.png?400|}}{{:informatique:nix:hp:restore_ignite_4.png?400|}} {{:informatique:nix:hp:restore_ignite_5.png?400|}}{{:informatique:nix:hp:restore_ignite_6.png?400|}} {{:informatique:nix:hp:restore_ignite_7.png?400|}}