===== Memory object size of exceedsgranule size - Increase granule size. =====

=== Symptomes ===

After adding additional physical memory (RAM) and changing CLM to ILM on the Npar, the following boot errors occur when trying to start the Vpar Monitor (vpmon):

<code>
Press Any Key to interrupt Autoboot
\efi\hpux\AUTO ==> boot vpmon -a
Seconds left till autoboot -   0
AUTOBOOTING...> System Memory = 333 MB
loading section 0
.... (complete)
loading section 1
......................................................................................................... (complete) loading symbol table loading System Directory (boot.sys) to MFS ......Launching /stand/vpmon
SIZE: Text:1617K + Data:53308K + BSS:10764K = Total:65689K Console is on virtual console - via PCDP
 
Console is on virtual console - via PCDP Current CLM granule countfor cell 0 is 512.
Memory object size (24636) of exceedsgranule size (128). Rebooting the system. Increase granule size.
</code>

=== Causes ===

The ILM granule size, which is currently set to the default value of 128, is too small to accomidate the additional ILM memory added to the partition. 
Answer/Solution
FIX:The Virtual Partitions Administration Guide Page 185 has additional information on memory granules. 
 
From the error above, the ilm granules size is too small after adding additional memory and converting all CLM (cell local memory) to ILM (interleave memory).    Your current ILM and CLM granule sizes are 128, which is the default.   There are known performance issues (very long boot times etc...) with having a very small granule size.  

=== Solution ===

  * Config des vPars

<code>
[root@rnsd511 - /root ] # vparstatus
[Virtual Partition]
                                                                          Boot
Virtual Partition Name         State Attributes   Kernel Path             Opts
============================== ===== ============ ======================= =====
rnsd511                        Up    Dyn,Auto,Nsr /stand/vmunix                
rnsd512                        Up    Dyn,Auto,Nsr /stand/vmunix                
rnsd513                        Up    Dyn,Auto,Nsr /stand/vmunix                

[Virtual Partition Resource Summary]
                                CPU      Num   Num     Memory Granularity
Virtual Partition Name          Min/Max  CPUs  IO       ILM         CLM
==============================  =======  ====  ====  ==========  ==========
rnsd511                           1/ 16     6     6         128         128    
rnsd512                           1/ 16     4    14         128         128    
rnsd513                           1/ 16     6    14         128         128    

                                                  Memory (MB)
                                          ILM                     CLM
                                # User                  # User
Virtual Partition Name          Ranges/MB     Total MB  Ranges/MB     Total MB
==============================  ======================  ======================
rnsd511                           0/   0         39935    0/   0             0 
rnsd512                           0/   0         34816    0/   0             0 
rnsd513                           0/   0         55668    0/   0             0
</code>

=> booter en mode "nPar"

<code>
vparenv -m npars
shutdown -h now
</code>

<code>
HPUX> boot
</code>

=> Recréer les vPars en utilisant vparstatus -v pour récup la config.

<code>
# vparcreate -p rnsd521 -g ilm:1024:y -g clm:1024:y -a cpu::8 -a mem::34816 -a io:1.0.0 -a io:1.0.1 -a io:1.0.2 -a io:1.0.0.2.0.6.0.0.0.0.0:boot -a io:1.0.0.3.0.6.0.0.0.0.0:altboot

# vparcreate -p rnsd522 -a cpu::4 -a mem::26622 -a io:1.0.4 -a io:1.0.6 -a 1.0.4.1.0.4.0.79.186.0.0.0.6 -a 1.0.6.1.0.4.0.89.186.0.0.0.6 -a  1.0.4.1.0.4.0.0x50000974080ae1a0.0x4006000000000000 -a 1.0.6.1.0.4.0.0x50000974080ae198.0x4006000000000000 -a 1.0.4.1.0.4.0.0x50000974080ae1dd.0x4009000000000000:boot -a 1.0.4.1.0.4.0.0x50000974080ae1d9.0x4009000000000000:altboot

# vparcreate -p rnsd523  -a cpu::4 -a mem::28031 -a io:1.0.12 -a io:1.0.14 -a io:1.0.12.1.0.4.0.89.186.0.0.0.0 -a io:1.0.14.1.0.4.0.79.186.0.0.0.0 -a io:1.0.12.1.0.4.0.0x50000974080ae198.0x4000000000000000:altboot -a io:1.0.14.1.0.4.0.0x50000974080ae1a0.0x4000000000000000 -a io:1.0.14.1.0.4.0.0x50000974080ae1dd.0x4007000000000000:boot

# vparenv -g ILM:1024 -g CLM:1024
# vparenv -m vpars
# shutdown -h now
</code>

<code>
HPUX> boot vpmon
</code>


===== Booter une VPAR avec toutes les ressources de la NPAR =====

  * Lister la bootstring

  lifls /dev/dsk/c1t6d0
  ISL          AUTO         HPUX         PAD          LABEL

:!: **important** : ISL / AUTO / HPUX

  lifcp /dev/rdsk/c2t6d0:AUTO
  hpux -lq

  * Pour modifier la bootstring :

  mkboot -a "hpux -lq" /dev/rdsk/c1t6d0

  * On bypasse l'autoboot :

  vparmodify -p tiths201 -B manual -B nosearch
  
===== Rajouter de la RAM =====
  
  vparmodify -p <Vpar name> -a mem::16384 
  
===== Supprimer un CPU =====

  vparmodify -p <Vpar name> -d cpu::1
  
===== Ajouter un CPU =====

   vparmodify -p <Vpar name> -a cpu::1
 ===== Passer le nb de CPUs à 4 =====

  vparmodify -p winona2 -m cpu::4